No expert, but my recollection is that the slight crown causes the lifter
to rotate -- a good thing.
Geo
On Sat, Jun 28, 2014 at 9:01 AM, <terryrs@comcast.net> wrote:
> Rather than buy new aftermarket lifters that are infamous for being too
> soft, I had my old ones ground at $4.00 each. I think he ground the
> surface flat.
> Talking with Oregon Cams in Washington, where I sent my cam for a stock
> grind, he mentioned he does lifters too and even puts the little ball on
> the surface...meaning I guess the surface that mates with the came is not
> supposed to be just flat.
>
> That make sense to anyone? And if so, Is a flat lifter that bad?
>
> By the way, Mark, congratulations on what appears to be a successful
> resurrection of the List!
>
> Terry Smith, '59 TR3A TS 58667
> New Hampshire
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|