Once the floats close the gas lines, that stops the flow ISTR.
Doug
On 9/13/2013 7:28 PM, Dave Connitt wrote:
> OK,
> I am getting real close to starting my TR4A for the first time in 13 years..
> Checking for possible fuel leaks, I put a couple of gallons of gas in the tank
> and using the priming lever on my new Moss fuel pump, I was able to fill the
> carbs. However, after a few additional pumps of the priming lever, suddenly
> nothing is happening when I press down on the priming lever. I am assuming
> that the carbs are full and when I press down on the lever, there is no room
> for more fuel so nothing happens...
> I went back upstairs to eat dinner and will see if I can bleed off some of the
> fuel and see if the pump will replace the fuel. I am just making sure that I
> won't toast my new camshaft by not running the engine for 20-30 minutes to
> seat the cam lifters by running out of fricking gas.
> Am I worrying too much or what?
> Thanks,
> Dave Connitt
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/mathews@uga.edu
>
>
>
--
p.s. I do not use a smart phone so if you email me and do not get a quick
response it is not because I am ignoring you. Just not at a computer.
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|