"Peter" <pfullam@nycap.rr.com> wrote:
>I've used coat hanger wire to make several tools.
Here's another use for coat hangers - they can be used in place of the
pins that hold the door handles on a TR6. Crimp the wire about 1" from the
end, stick it is the hole in the winder between the handle and the door
panel and snap it off. Much easier than trying to hold back the panel while
holding the pin in a pair of forceps and trying to get it to drop in.
Dennis Culligan, Highland, NY / 1976 TR6 CF57948U
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|