Hi Jerry,
I dug this out of my archives:
> Thanks to Rich Rock for sending:
>
>>
>> Torque specs from the Bentley TR250 and TR6 manual:
>>
>> Lower wishbone mounting bracket to frame 20-25 lb/ft
>> Lower wishbone to mounting bracket............38-46 lb/ft
>> Lower wishbone to vertical link.....................50-65 lb/ft
>>
>
> Which brings up another question. I assume "Lower wishbone to vertical
> link" means the bolt through the trunnion. I've always used the TR4
> instructions (5 lbs then back off a flat), since the Bently/Factory manual
> is pretty much mute on the whole 4A front suspension. 50-65 is a big
> difference, might explain why I wear trunnions out. Can anyone with a
250/6
> manual tell me if this area should be lubricated at all during assembly?
Or
> is anyone willing to scan and post (or send me, and I can put it up) the
> relevant sections of the 250/6 manual for the front suspension?
>
> Thanks,
> Darrell
--
Darrell Walker
66 TR4A IRS-SC CTC67956L
81 TR8 SATPZ458XBA406206
Vancouver, WA, USA
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|