Re: [TR] TR4A - wiring harness grommet

["Cliff Hansen" <cliff_hansen@earthlink.net>]

So, the easiest solution to my problem turned out to be to order the correct 
part.
For my 4A, at least, the grommet for the firewall for the main wiring 
harness is TRF part RG1, not RG3 as listed.  Thanks to Bill Beecher for 
suggesting the grommet listed for the TR3 (RG1) which fits perfectly.
Cliff



-----Original Message----- 
From: Cliff Hansen
Sent: Saturday, September 08, 2012 10:05 AM
To: list Triumph
Subject: [TR] TR4A - wiring harness grommet

Guess I'm not getting that wiring harness in today.

This is a dumb issue, but, wondering if anyone else dealt with it.  TRF 
sells
part #RG3 for the large grommet on the RHS of the firewall through which the
wiring harness passes.  This grommet is for a 1 7/8" hole and is the same
part number for TR6.  The hole in my car is 1 3/8".  TRF doesn't list any
other part.  Moss only lists a 1 1/2" grommet for the TR4A and nothing for
the TR6.

Does anyone know either 1) the correct TRF part #; or 2) if the Moss part 
fits
a 4A?

Thanks much,

Cliff

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/cliff_hansen@earthlink.net 

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net