yes i appreciate the early dzus and later screw.
but as the slot in the guide
plates are the same dimension and will fit both, screw hole size is
irrelevant. no?
From: Andrew Uprichard <auprichard at uprichard.net>
To: 'Frank
Fisher' <yellowtr3 at yahoo.com>; triumphs at autox.team.net
Sent: Monday, April
16, 2012 3:50 PM
Subject: RE: [TR] TR2/3 windshield stanchions
The later
models have screws in place of the Dzus fasteners.
Andrew Uprichard
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Frank Fisher
Sent:
Monday, April 16, 2012 6:23 PM
To: triumphs at autox.team.net
Subject: [TR] TR2/3
windshield stanchions
looking at the windshield stanchions for the pre 60000
and post 60000.
it
looks to me that the pre 60k would work on the post 60k
i
have one lh pre 60k
and one rh post 60k stanchion.
i have both pre and post
stanchion guide plates
and have slid them onto the respective stanchions and
can see no difference.
except that the back of the pre 60k stanchions are
machined for the lock
washer of the dzus fastener.
am i missing something?
Frank
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard at uprichard.net
the head of the screw on both dzus and screw is the same and they both fit
into a recessed hole. so the head is providing back to front stability and the
slot provides up/down stability.
no?
what im looking for is that an early dzus
will fit a later screw type?
or a later screw with the hole drilled out will
fit an early dzus?
|