Eureka ! That was it. Found the match, 8-32 is quite common, and fits
like a glove.
Thank you Randall.
-----Original Message-----
From: Randall [mailto:tr3driver at ca.rr.com]
Sent: Wednesday, April 11, 2012 2:54 PM
To: Daehler, William F; triumphs at autox.team.net
Subject: RE: [TR] TR4 Replacement Turn Cancellation Signal Switch
> What's going on here? Any suggestions?
The parts catalog shows those screws as TP0402. According to the hardware
catalog, those should be #8 NF, which would be 8-36 instead of the much more
common 8-32. Seems odd to me either way, but I would check the screws you
have; if they are 8-32 then try 8-36 and vice versa.
-- Randall
*****************************************************************************
*********** Note: If the reader of this message is not the intended recipient,
or an employee or agent responsible for delivering this message to the
intended recipient, you are hereby notified that any dissemination,
distribution or copying of this communication is strictly prohibited. If you
have received this communication in error, please notify us immediately by
replying to the message and deleting it from your computer. Thank you.
*****************************************************************************
***********
|