Terry,
Last time I changed mine I went to Advance Auto and bought a roll of rubberized
cork gasket material and made my own.
Then I siliconed it to just the pan and laid it flange down on a flat surface
and put some weight on it for a
day or 2. I lightly greased the top surface and installed it. I have had it off
and on a few times since and
it is still a good leak-proof fit aslong as you don't crank down on the bolts
too much.
Bob Maassel
59TR3A
Fort Wayne
----- Original Message -----
From: terryrs at comcast.net
To: triumphs at autox.team.net
Sent: Wednesday, April 4, 2012 11:39:37 AM
Subject: [TR] TR3 Oil Pan Gasket
I had a cork sump pan gasket for my TR3, and found that I was able to finally
stop the leaks.
Now, doing the engine rebuild, neither Moss or TRF carries one.
Anybody know of a source?
Thanks!
Terry Smith, '59 TR3A
New Hampshirew
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/tr3abobm77
at frontier.com
|