John - you should not have to remove the w/s. In one of my tool kit
purchases (who knows where) I have a 90d angle Phillips and Flat screw
driver. I remember having to change the mirror and it worked great. Mine
are about 1" x 2 1/2" with the longer end fitting a 1/4 hex-head driver.
Just take it slow. The screw isn't that long but you can only do about 1/4
turn at a time.
Carl
1961 Triumph TR3A - TS81802LO
http://mysite.verizon.net/cfmtr3a/
getting closer. 2012 is the year!
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of John Gillis
Sent: Sunday, January 08, 2012 7:53 AM
To: triumphs at autox.team.net
Subject: [TR] TR2 Mirror
Fuse issue sorted, many thanks, next what are the screws that fit the mirror
to the dash? the Moss catalogue and my S.T Parts manual both indicate spire
screws (chromed) I am fairly sure I can see threads in the holes on the dash
for mine, was there a change to screws at some stage? I imagine I will also
have to remove the windscreen to fit the mirror regardless of the type of
fixing?
Regards
John
1954 TR2 Long Door
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/cfmtr3a at verizon.net
|