Just disconnect the wires and use an ohmmeter or test light to test between
the hot wires and ground. There should be no continuity with the brake not
engaged.
You are fortunate that there are only two light fixtures and a switch to
consider.
Good luck,
Bill
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of John Gillis
Sent: Tuesday, January 03, 2012 3:20 PM
To: triumphs at autox.team.net
Subject: [TR] Fuse Q solved but....
As usual ye guys hit the nail, quick trip to the garage, ignition on, push
brake pedal, pop goes the fuse. I had a quick look at the connections, look
OK, how do I trace this?
John
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net
|