> This cover has 2 switches at the back,
> 1 on each
> side. Can this cover be used for overdrive, or would I need to tap
> another hole for an additional switch?
The overdrive switch needs to sense the 3/4 shift rail, which is the one in
the middle. So the side switches cannot be used for overdrive. In
addition, if you are going to drill & tap at the back, first be sure the
shaft has the appropriate notch in it. Not all of them did. The hole needs
to be accurately located relative to the notch.
> Are the 2 switches
> for seat belt
> and reverse?
Most likely.
-- Randall
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|