triumphs
[Top] [All Lists]

[TR] wrinkle paint

Subject: [TR] wrinkle paint
From: auprichard at uprichard.net (Andrew Uprichard)
Date: Sun, 18 Sep 2011 20:48:30 -0400
References: <1316123884.12540.YahooMailNeo@web65309.mail.ac2.yahoo.com> <1316385152.62790.YahooMailNeo@web120211.mail.ne1.yahoo.com>
I was always taught to put the piece in the oven after painting it

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Frank Fisher
Sent: Sunday, September 18, 2011 6:33 PM
To: Gary Nafziger
Cc: triumphs at autox.team.net
Subject: Re: [TR] wrinkle paint

if its the moss wrinkle paint, i found i needed to leave it about 3 weeks to
dry hard
Frank

From: Gary Nafziger <nafzigerg at yahoo.com>
To:
"triumphs at autox.team.net" <triumphs at autox.team.net>
Sent: Thursday, September
15, 2011 2:58 PM
Subject: [TR] wrinkle paint

Before using wrinkle paint on my
dash piece (tr-3) I used some on a scrap
piece of steel just to see how it
worked.  I applied it and let it set the
recommended 12 hours to dry.  I was
very happy with the
result...........looked very nice but also found that it
scratched very easily
with just finger nail scraping.  I'm hoping I simply
need to let it dry longer
to cure completely.  I did the work in my basement
which might have been 60
some degrees so the temp might be a consideration.

I
went ahead and sprayed
the dash piece this afternoon and will let it set all
weekend hopefully to dry
nice and hard by monday.

Anyone else have any
experience with this paint?
gary n.


triumphs at autox.team.net

Donate:
http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/yellowtr3 at yahoo.com


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard at uprichard.net

<Prev in Thread] Current Thread [Next in Thread>