I found three pieces of advice particularly valuable:
1. Glue the rubber piece to the glass.
2. Trim the rubber where it has to be folded around the corners.
3. Use plenty of soap
It is a difficult job at best, but made easier when you follow these
guidelines.
Andrew Uprichard
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of George Richardson
Sent: Thursday, September 01, 2011 6:42 PM
To: triumphs at autox.team.net
Subject: [TR] TR3 Windshield
Way back, when I first restored Squirtle the TR3, I replaced the
windshield. What was provided then was some rubber channel thing that
could never get into place, so I just used regular windshield sealer.
That worked fine, maybe too fine, since I have problems getting it out
when (purely for stupid reasons well withing my control) I smashed my
windshield.
I ordered a seal from TRF along with a bunch of other stuff, but what
cam this time is a flat rubber piece that I guess wraps around the edge
of the windshield glass. Anyone use this? Any advice? Should I just
stick with my windshield sealer?
--
George Richardson
triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard at uprichard.net
|