triumphs
[Top] [All Lists]

[TR] wiring question

Subject: [TR] wiring question
From: trglory at verizon.net (Joseph Laurito)
Date: Thu, 01 Sep 2011 16:39:57 -0400
References: <9795DA250F1A48E086B81059771DF7A2@DCH6RFC1>
Some of the cars had an interior light between the seats...could be for
that.

Joe

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Andrew Uprichard
Sent: Thursday, September 01, 2011 8:15 AM
To: 6pack at autox.team.net; triumphs at autox.team.net
Subject: [TR] wiring question

I am installing a new harness in my TR250 (thanks to Marv Gruber) and have
come across two wires I cannot account for. They arise adjacent to the brake
safety, and are both about 3 inches long.  One is white and one black.
There were no corresponding wires in the old harness.

 

I am assuming the black is a ground, but the white?  By the way, this is not
the ignition feed to the coil, which comes off in a loom about a further
down the main harness.  Does anyone have any ideas?

Andrew Uprichard


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/trglory at verizon.net

<Prev in Thread] Current Thread [Next in Thread>