According to the AAW schematics (http://www.advanceautowire.com/tr2506.pdf),
there's only 5 places for a W wire:
ignition switch to alternator warning lamp
ignition switch to brake warning lamp
brake warning lamp to brake warning switch
ignition switch to fuse box
fuse box to coil
Bob Danielson
http://tr6.danielsonfamily.org
1975 TR6 with:
Throttle Body Injection
Toyota 5 Speed
Nissan Diff & CVJs
-----Original Message-----
From: Andrew Uprichard
Sent: Thursday, September 01, 2011 8:14 AM
To: 6pack at autox.team.net ; triumphs at autox.team.net
Subject: [TR] wiring question
I am installing a new harness in my TR250 (thanks to Marv Gruber) and have
come across two wires I cannot account for. They arise adjacent to the brake
safety, and are both about 3 inches long. One is white and one black.
There were no corresponding wires in the old harness.
I am assuming the black is a ground, but the white? By the way, this is not
the ignition feed to the coil, which comes off in a loom about a further
down the main harness. Does anyone have any ideas?
Andrew Uprichard
triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/75tr6 at tr6.danielsonfamily.org
|