great picture Geo
i used Randall's fire ring recently and having done it once
ill never build a wet liner again without doing this.
as you can see from the
picture one side of the copper gasket is rolled over to hold the non rolled
side in place.
the fire ring is soldered in place just around the where the
roll over finishes. the solder is just to hold it in place.
Randall told me he
now uses super glue to hold the ring of wire in place.
i soldered in 4 places.
the fire ring side goes to the sleeve side, not the head.
i did not attempt to
have any groves machined into the sleeves.
its been great since.
Frank
From:
Geo Hahn <ahwahneetr at gmail.com>
To: David Ljung Madison <team.net at daveola.com>
Cc: triumphs at autox.team.net
Sent: Monday, August 15, 2011 2:57 PM
Subject: Re:
[TR] TR-3B Head Replacement (John Walker)
On Sun, Aug 14, 2011 at 7:24 PM,
David Ljung Madison
<team.net at daveola.com>wrote:
> > ..plan on using
Randall's "Fire Ring of .020" copper wire to ensure
> > I have a good seal
against the liners.
>
> This sounds like a great way to help keep the seal.
>
> Does anyone have photos of how this ring of wire
> is done?...
>
Here a
photo I saved from a post by Randall...
http://i1214.photobucket.com/albums/cc499/Ahwahnee18/20awgWireAroundCylinder.
jpg
On Mon, Aug 15, 2011 at 6:54 AM, Dixie4 <dixie4.wales at virgin.net>
wrote:
> In UK we call this Wills Ringing, I assume some guy called Wills may
have
> invented the idea.
>
And in the US we call it Randall Ringing?
Geo
triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/yellowtr3 at yahoo.com
|