thanks Chad
11/16 = 17.4mm
From: Chad <triumph74tr6@yahoo.com>
To: Frank
Fisher <yellowtr3@yahoo.com>
Sent: Wednesday, August 17, 2011 3:17 PM
Subject:
Re: [TR] zenith carb float height
11/16"
Chad in Tulsa
From: Frank Fisher
<yellowtr3@yahoo.com>
To: triumphs@autox.team.net
Sent: Wednesday, August 17,
2011 3:16 PM
Subject: [TR] zenith carb float height
having a discussion with
a friend about the float height on zenith carbs.
for the TR6 ZS type i think
its 15 to 17mm. cant get to my manual till the weekend. can any one confirm?
also for the zenith supplied on the TR4, was it a different carb with
different float height adjustments?
thanks
Frank
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/triumph74tr6@yahoo.com
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|