In a message dated 8/2/2011 1:57:10 PM Central Daylight Time,
geomurphy@windstream.net writes:
> I am restoring a 1960 TR3A. I have leather and vinyl strips from the
> Roadster Factory that supposed to be sufficient to cover the Dash and all
> the trim pieces. I have enough leather to cover the long piece above the
> dash and two doors and the two arched pieces directly behind the doors.
> But
> There are three other trim pieces that are under the convertible top when
> in
> the down position. One long piece in the very back and two that are in
> the
> rounded corners. Should these three pieces be covered in leather or the
> vinyl material? Thanks George Murphy, 60 tr3A Waleska Ga.
>
I received the same thing in my kit from Moss. I presume the rear capping
pieces are to be covered with vinyl. Likewise, the leather seats have
leather seating surfaces but the rest is vinyl. >et me know if you figured out
how to stretch the leather over those curved pieces. I gave up and I'm going
to sent them off to someone further along the learning curve.
Dave
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|