Andy.........where did you find the Repair Time Schedule? Sounds like a
great resource or interesting reading.....
Larry..........you can save about 2 - 3 hours of shop labor if they'll let
you pull/reinstall the interior yourself. Pretty easy to do but time
consuming. The great unknown with our cars is how easily they come apart
unless you've taken them apart already. Frozen/stripped bolts are
commonplace and that adds to the time factor. Some guys can pull the tranny
without dropping the exhaust but my exhaust comes apart easily so I always
drop it....... the rear tranny mount is tough to get at with the exhaust in
place.
Pulling the tranny usually turns into a "while I'm in there I might as well"
scenario...........i.e. new clutch, new t/o bearing, pin the clutch fork,
resurface & balance flywheel, new tranny seals etc.
Bob
Bob Danielson
http://tr6.danielsonfamily.org
1975 TR6 with:
Throttle Body Injection
Toyota 5 Speed
Nissan Diff & CVJs
-----Original Message-----
From: Andrew S. Mace
Sent: Monday, August 01, 2011 10:56 AM
To: lgmtr6@yahoo.com ; triumphs@autox.team.net
Subject: Re: [TR] What's a reasonable price for doing a TR6 clutch?
If it helps at all, my Triumph "Repair Time Schedule" shows 6.3 hours for
""Clutch assembly and/or plate. Replace" -- same for TR4A, TR5PI and TR6PI
(those are the relevant sections in my copy)!
--Andy Mace
-----Original Message-----
From: lgmtr6 <lgmtr6@yahoo.com>
To: Triumph Mailing List <triumphs@autox.team.net>
Sent: Mon, Aug 1, 2011 8:18 am
Subject: [TR] What's a reasonable price for doing a TR6 clutch?
Just trying to get a ballpark figure for a clutch replacement on a TR6?
Thanks
Larry Miceli
Mount Dora, Fla
74 TR6.
73 Stag
58 TR3
Sent from my Verizon Wireless BlackBerry
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|