As you already know from your installation it is just a lot of track & trace
to find. I would start by disconnecting the head lights/running lights/tail
lights one at a time and try the turn signals after each disconnection. If
no resolution there, start at the stator tube wiring and run your
connections all the way through.
It will be in the last place that you look.
Good luck,
Bill
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of davewillner
Sent: Sunday, June 12, 2011 12:42 PM
To: triumphs at autox.team.net
Subject: [TR] TR3A turn signal question
New wiring harness installed, everything works well. I set up the driving
lamps, heater and fixed the connections to the wiper switch. The one problem
I do have is when the headlights are on the blinkers don't flash, when the
headlights are off they work fine, any thoughts? Thanks
Dave Willner
Stroudsburg PA
59 TR3A
70 MGB
70 BSA 441 VS
triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/wbeech at flash.net
|