Ah, did not realize that was where they went. Didn't see a hole. Will
look again. Your solution may be a good alternative. The wire could come
all the way out to the edge of the shroud.
Thanks
C
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Randall
Sent: Sunday, May 22, 2011 9:24 PM
To: 'TR List '
Subject: Re: [TR] Where does it go?
I'm missing something, Carl. What is wrong with the original location, on
the little shelf behind the horn mounts ?
FWIW, I've not had real good luck with those original ground clips. Instead
I use a short length of black wire, with a 1/4" ring terminal under a horn
bolt; plus a bullet and 4-way sleeve at the other end. The horn bolt makes
more positive contact with the body, and the vinyl sleeve reduces corrosion.
-- Randall
triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/triumphs/cfmtr3a at verizon.net
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|