triumphs
[Top] [All Lists]

Re: [TR] TR4A - A Few Electric Questions

To: "G.D. Huggins" <guy@genfiniti.com>, <triumphs@autox.team.net>,
Subject: Re: [TR] TR4A - A Few Electric Questions
From: "Jerry Van Vlack" <jerryvv@roadrunner.com>
Date: Wed, 25 May 2011 18:24:49 -0400
Guy, you should have 3 wires coming out of the motor if it's a two speed 
motor. Green will be positive power to the motor. It should be fused. There 
is a screw that goes into the end plate of the motor that a ground attaches 
to. That ground is only for the parking feature, it will not park without 
that ground attached. The other two wires coming from the motor attach to 
their corresponding leads from the wiper switch. The wiper switch controls 
the "ground" to the motor and if both are energized the motor goes on slow 
speed. If only 1 is energized the motor goes on fast speed. Be sure to have 
the switch wired properly and grounded.
I've just gone thru all of this with my motor. TR4A should have a 2 speed 
motor.
JVV

----- Original Message ----- 
From: "G.D. Huggins" <guy@genfiniti.com>
To: <triumphs@autox.team.net>; <RedRiverTriumph@yahoogroups.com>
Sent: Wednesday, May 25, 2011 10:51 AM
Subject: [TR] TR4A - A Few Electric Questions


> All,
>
> First... an update.  I am getting seriously close to completing the 
> restoration project.  So close that I am also starting a parallel effort 
> to get the car squared away with Texas. (title, registration, etc.)
> I am in the process of completing the new Advanced Auto Wire harness, and 
> am down to terminating the wiring under the dash.  Once the electrics are 
> done, its on to the interior for the finish.  With that project completed, 
> the next project is getting my newly restored car ready to drive, which I 
> am organizing as a separate effort.
>
> Anyway, my latest questions..
>
> Every schematic I look at has the tranny interlock switches represented as 
> two circles touching.  To one of the terminals is the powered wire 
> (yellow), the opposite the ground.  Does anyone know which switch on the 
> schematic equals which switch on the tranny?  Does it even matter? 
> Finally, does it matter to which terminal on the switches that the power 
> and ground wires attach?
>
> I have the Lucas DR3A wiper motor.  It has terminals labeled "1", "2" and 
> "E".  In the schematic, it shows FOUR wires terminating there; N/LG, R/LG, 
> G, B.  The first two come from the switch, G is power and B the ground. 
> How do I attach four wires to only three terminals?
>
>
>
> Cheers,
>
> Guy D. Huggins
> 1965 Triumph TR4A
> CTC 63569LO
>
> Online project diary at http://www.genfiniti.com/triumph
>
>
>
>
>
> triumphs@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/triumphs/jerryvv@roadrunner.com
>
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive 

triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums



Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>