[TR] Triumphs Digest, Vol 5, Issue 96

[pethier at comcast.net (pethier at comcast.net)]

Grind the leading edge of adjacent two flutes blunt, and lightly blunt their 
peripheries. ? ?Cut all the other flutes sharp a bit shorter and don't disturb 
the peripheries.

Phil Ethier West Side Saint Paul Minnesota USA
1973 Triumph Stag LE22439UBW "uncle jack"
2004 Suburban 8.1
2005 Lotus Elise
2007 Saturn Ion 3 2.4
pethier [at] comcast [dot] net
http://www.flickr.com/photos/pethier
http://www.triumphtransamerica.org
http://www.mnautox.com


----- Original Message -----

> From: "Randall" <tr3driver at ca.rr.com>
> To: triumphs at autox.team.net, nafzigerg at yahoo.com
> Sent: Friday, March 18, 2011 3:26:36 PM
> Subject: Re: [TR] Triumphs Digest, Vol 5, Issue 96
> 
> > My concern with modifying the reamer by hand is that you could make
> the
> > reamer cut oversize,
> 
> That would actually be a very useful trick sometimes. ?If anyone
> figures out
> how to make a reamer cut larger by grinding metal away from it, please
> let
> me know!
> 
> -- Randall 
> 
> _______________________________________________
> Triumphs at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation ?$11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Manage your account:
> http://autox.team.net/mailman/options/triumphs/pethier at comcast.net