Listers,
I have been looking for a heavy steering problem with my power steering TR8
FHC for sometime. I have been doing it a step at a time.
The pump was replaced. No change. I reduced the tension on the rack. No change.
Then the rack started to leak. Oil was pouring out. So I swapped the rack. It
is all back together and the result is the same.
The steering "feels" heavy and does not return well. This car has been
completely re-done all steering parts and springs bushing etc and driven
perhaps 5000 miles.
When the car is off is front wheels and the steering is worked the top of the
struts and the top cup washer turn with the steering. If the car is on the
ground the tops do not turn. Is this normal or are the top bearings not
assembled correctly? My other car is in storage so I will not be able to
compare there for another two weeks.
Please folks do the tops of your struts turn?
Please and ideas or comments?
CHEERS
John
John Taylor
Greenfield, Ma
Gloucester, Ma
USA.
* ALWAYS BE SAFE *
Life is not a race.....you do not want to finish first.
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|