Wow at the hair splitting. Just taper the trailing edge of the reamer. The=
angle of a few degrees is all you need. The tool its self will do the work=
just fine. If you are anal about it coat the freshly reamed counter bore w=
ith loctite or glyptol. Press in the bushings. =
Here's the key. After the bushings are inserted. Chuck you new throttle sha=
ft into a high speed drill. I use my lathe. Apply a few drops of cutting oi=
l to the shaft and spin the shaft. It will seat the new shaft to the new bu=
shing. =
Ronnie Babbitt =
Northrop Grumman
Model Maker =
Sent from my BlackBerry=AE smartphone with SprintSpeed
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account: http://autox.team.net/mailman/options/triumphs/mharc@a=
utox.team.net
|