Hi list!
Well, I finely got a chance to check out my left front hub for wheel wobbly=
. I =
took the list's advice on checking out the front hub by use of a dial indic=
ator. =
Placing the movable 'pin' as close to the outside face of the hub & rotatin=
g the =
disc slowly (without moving the alignment of the hub to the needle, to get =
a =
reading of .030" of a lateral waver.
Question: =
Is that with in spects? =
What is the specifications?=A0=A0=A0=A0 =A0I know that anything more than .=
003" of lateral =
movement on the flywheel is the max it can be.
I also noticed that one wheel stud=A0is able to be pushed out with the ligh=
t =
pressure with my figure. I'll have to get that fixed later, but I'm now thi=
nking =
if it's necessary to get the hub refaced?If I don't reply to you right away=
, it =
most likely that I read your reply on the digest.
=A0-Cosmo Kramer =
=
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account: http://autox.team.net/mailman/options/triumphs/mharc@a=
utox.team.net
|