So, the bottom of the upright has threads into which the zerk screws, and the
bottom of the trunnion is open to the elements?
I assume that when you grease it, the excess grease falls out at the bottom?
R
Sent from my Verizon Wireless Phone
----- Reply message -----
From: "Cosmo Kramer" <tr4a2712 at yahoo.com>
Date: Mon, Feb 28, 2011 21:18
Subject: [TR] Subject: TR# trunnions
To: <triumphs at autox.team.net>
Hi Frank & list!
On my TR4A, the zerks are NOT on or in the trunnions but in the vertical link
with a hole drilled down the center to the insert of the zerk is. You oil
through the zerk & it travles down the center of the Vertical Link & is forced
up around the threads?& out the top of the trunnion where the grease cap or dust
excluder is.
?-Cosmo Kramer
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account: http://autox.team.net/mailman/options/triumphs/spook01 at
comcast.net
|