I use odorless paint thinner. I bought a metal pan that goes under a water
heater and put it on a table. When parts are clean I put the liquid back
into a clear plastic 1 gal Cranberry Juice bottle (sans Cranberry Juice),
and let the solids settle out and use it again. When it is too dirty I haul
it off to local recycling. Parts dry fairly quickly, and the stuff,
although flammable, is nowhere near as dangerous as gasoline.
I highly recommend getting a plastic garden sprayer and putting a fitting on
the top/side to connect an air hose. This requires a valve so you can
GENTLY introduce air pressure and have a squirter to use with the setup
described above. GENTLY is a KEY word here and it saves you from repeatedly
having to pump up the sprayer.
I cleaned my TR3A block this way as it fits right over the pan while mounted
on the engine stand.
On Wed, Feb 23, 2011 at 7:35 AM, Chris Simo <ccsimonsen@gmail.com> wrote:
> I just tore down my nasty greasy engine. I took the big parts with the
> block to the machine shop and am getting those cleaned with the block.
>
> I used to use gasoline to clean parts - but pretty sure that's not the way
> to go today, With everything I have I think there would be a case of brake
> cleaner or more to get the hardware, etc clean.
>
> What are you using to clean parts?
>
> Thanks
>
> Chris
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Manage your account:
> http://autox.team.net/mailman/options/triumphs/dlylis@gmail.com
>
>
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|