Hi Chris,
The system I used the last time was:
1. Wipe as much as possible off with paper towels (lots of paper towels).
2. Spray with Simple Green or citrus-based degreaser, wipe with more paper
towels. Be careful with aluminum parts, some of the degreasers will stain.
Scrub with toothbrushes (small areas) or a kitchen brush.
3. Wash in hot/warm, soapy water. If you don't have a sink for this, get a
plastic tub. If the part is prone to rust, wipe some clean oil on it after
drying.
-Darrell
--
Darrell Walker
66 TR4A IRS CTC67956L
Vancouver, WA, USA
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|