> The seat belts on my 63 are attached to 2 each eye bolts. One each on
> each
> side of the drive shaft tunnel and one each on the inside of the B
> post.
>
> There should be a very thick 1/4" plate on the inside of the wheel
> wells. The
> b post bolt goes through this and has a lock washer and lock nut. If
> you need
> the part #s let me know and I can look them up.
>
> I am not sure what size the bolt is but I am guessing about 5/8"
>
> Bob
Virtually every car equipped with seat belts from the factory uses bolts which
are 7/16-fine. Even metric cars. I took an eyebolt out of an MGB and put it
in a Miata.
Phil Ethier
|