On Friday, January 14, 2011 06:06:19 pm thenicholls at verizon.net wrote:
> List,
>
> Happy 2011. Working on my TR6 if it ever warms up.
>
> One owner 72 TR6. I worked on a front grill restoration, the original one
> had plastic wrapped on the lower valance (which I have heard from other
> owners they have seen).
>
> I removed the entire grill, replaced the valance with one from TRF, painted
> the grill, and put it all back together. It turned out great.
>
> Two years later, the point at the front of the valance has the paint off
> and rust showing. So, I purchased another valance from TRF and am looking
> for some advice.
>
> What would be the best way to prevent this from happening again. My
> thoughts: 1.) Paint the whole thing with Rustoleum
> 2.) Paint the whole thing with a matte finish clear coat
>
> Any input on this would be appreciated, thanks in advance.
>
> Craig
> 1972 Triumph TR6
Craig,
If you mean the black piece that fits on those slots in front of and is then
attached to the grill. I would have it powder coated in a matte black. That
should keep it from rusting.
Bob,
Also with a 72.
|