triumphs
[Top] [All Lists]

Re: [TR] Stainless oil pressure hose with solid pipe up to guage ?

To: triumphs@autox.team.net
Subject: Re: [TR] Stainless oil pressure hose with solid pipe up to guage ?
From: Bob <yellowtr@adelphia.net>
Date: Wed, 26 Jan 2011 07:48:16 -0500
On Tuesday, January 25, 2011 09:14:36 pm Foster, Stan (HP IT) wrote:
> I wonder if someone could tell me where I can find the oil pressure line
> configuration shown on this white early TR3A. The picture is from the VTR
> national last year and I apologize for not making a note of the owner of
> this North Carolina TR.
> 
> http://i38.photobucket.com/albums/e119/foster461/VTR2010/IMG_0512.jpg
> 
> Stan
Stan,

Yes Ted does sell them for the 3,4 and 6. I put one on the 6 and is is much 
better than the OEM plastic line.

But the 3 had a steel line originally which I find superior even to the part 
Ted sells. The braided line will eventually go, but the steel line will last 
forever.

The only part on the 3 and 4 that will go is the braided line from the engine 
to the steel line. That is a 5 minute fix with a new line from TRF and you 
don't have to remove the OP gauge to install the line.

I see the steel lines on Ebay from time to time and TRF sells a better than 
OEM braided line from the engine.

Both my 3 and 4 are stock steel lines.

Bob
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>