Hi Dan,
I am not sure why you would need to seal an aluminum tank, assuming that's
what AL means...
I recently flushed out my TR3 tank with a product from KBS coatings and
was very satisfied. I used their pre-treatment to clean out all of the gunk and
then sealed it up with the coating, which is a nice aluminum color. Very
satisfied. I used the "motorcycle" sized kit.
Bill in Tehachapi
From: Dan Cronin <adcronin@mi.rr.com>
Subject: [TR] Gas Tank Sealer ?
To: Triumph List <triumphs@autox.team.net>, Friends of Triumph Triumph
<fot@autox.team.net>
Message-ID: <EC6EFD3C-150C-4992-BD2C-D92CCD58DBB7@mi.rr.com>
Content-Type: text/plain; charset=us-ascii
Back in 1997 (13 years ago) I had an AL gas tank sealed at a body shop with
whatever was the trick sealer at the time. With the increased use of blended
fuels today (and growing) I am curious what those with knowledge of this
subject think should be done now.........the tank has never been placed in
service but I am hopefull it will in the next year or so.
Dan
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|