I'm replacing the fork and shaft due to a broken pin. I was planning to
crossdrill and fit a 1/4" bolt but noticed that some vendors are now selling a
hardened pin. Would using the hardened pin accomplish the same purpose as
fitting the bolt? I would appreciate any advice.
I also thought I'd share a positive experience with TRF. The TR4A project has
been stalled for a number of years but health, family and finances have aligned
favorably once more. I recently placed an order with TRF; my last order with
them was in 2001. The charge to my card was about $300 less than the cost of
the order. When I called to ask about the difference, they informed me that
they had applied credits and a gift certificate that had been in their files
since my last order - 9 years ago - and which I had completely forgotten about.
That speaks volumes about integrity and the value they place on their
customers.
Cliff
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|