triumphs
[Top] [All Lists]

Re: [TR] Pertinox Wiring and General Comment

To: "'Triumph List'" <triumphs@autox.team.net>
Subject: Re: [TR] Pertinox Wiring and General Comment
From: "Randall" <tr3driver@ca.rr.com>
Date: Mon, 1 Nov 2010 10:10:28 -0700
> I discovered that the poles on my (Lucas)
> coil
> are not labeled + and -, they are labeled BAT and DIST. Wot now,

Interesting.  Are you sure it wasn't "CB" and "SW"?

There is an old-time test for coil polarity: With the engine running, hold
the plug wire a bit away from the plug terminal (or any ground) and the tip
of a (sharpened) ordinary "lead" pencil in the gap.  If you look closely,
you should be able to see that the spark is brighter to one side of the
pencil tip.  If that side is towards the plug/ground, the spark polarity is
correct.

There is a better write-up (and another method) at
(Warning MG content <G>)
http://mgaguru.com/mgtech/ignition/ig104.htm

-- Randall 
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TR] Pertinox Wiring and General Comment, Randall <=