List,
Has anyone used coil spring spacers on the front springs of a TR6 to raise
the ride height by approx 3/4" to 1"? I've seen them used successfully on
the rear coils of a 6.
Evidently the pro's of doing this are quick installation and relatively low
cost; the con's would be perhaps an increase in ride harshness since
you've effectively taking away some of the spring's rebound space......
Thoughts?
Chip Krout
Delaware Valley Triumphs, Ltd.
Skippack, PA
1976 TR6 CF57822U
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|