On Saturday, October 16, 2010 12:04:31 pm William Brewer wrote:
> I am going to revise my sleep deprived email below.
> Looking at the
> key, the key is only turning to the first position and I can't make it go
> to II or III. It must be something in the key lock/column from sliding the
> column shaft back earlier.
> Any ideas?
>
> -Bill
>
>
Bill,
If your steering lock is not functioning correctly then I am guessing that is
your primary problem here.
When I installed the switch/lock on my 72, I really had to play with the
fitting/location to insure the lock mechanism locked and unlocked as required.
I never really tried the 3 position switch as I was concerned with the locking
position.
Once I got the lock to function the switch worked as required.
That is where I would work first.
I am guessing once you get the lock working correctly the switch will work as
designed.
Also make sure you lube the locking post with some 3/1 oil.
Bob
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|