triumphs
[Top] [All Lists]

Re: [TR] TR3A - lighter

To: "Carl TR" <cfmtr3a@verizon.net>, "Triumphs"
Subject: Re: [TR] TR3A - lighter
From: "Carl TR" <cfmtr3a@verizon.net>
Date: Thu, 07 Oct 2010 21:49:21 -0400
sorry about the dddddd   not sure what I did

Anyway - it seems that an auxiliary bracket is the consensus.
I do have a sheet of black hard plastic - as time permits I'll work on 
coming up with something.

Thanks.
Carl

----- Original Message ----- 
From: "Carl TR" <cfmtr3a@verizon.net>
To: "Triumphs" <triumphs@autox.team.net>
Sent: Thursday, October 07, 2010 4:38 PM
Subject: [TR] 
TR3AdddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddTR3A
 
 - lighter


> Yes, I have one - original in box.   won't be used as a lighter - but as 
> an electrical connection.
> Question - where should it be mounted.?
>
> To me it should be where the windshield/washer pump is mounted - in the 
> area between the cubby box and center panel just above where the ashtray 
> mounts to the facia support.
>
> The other three options seem to be:
> 1) in that same spot on the other side of the center panel (or as an 
> option mount the w/w pump there)
> 2) on the facia at the upper right corner of the center panel.  I am not 
> sure of the clearance there.
> 3) on a bracket mounted next to the ashtray under the dash facia.
>
> Any thoughts?
>
> Thanks
> Carl
>
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TR] TR3A - lighter, Carl TR <=