Joe-
A very timely note! I was literally installing the new seal in my 3A engine
this afternoon while you were typing it. The installation was knock down
simple, thanks to Chris's instructions and the modified scroll and
installation tool I picked up from you. I'm very pleased so far. Fingers
crossed, this will hopefully lead to a nearly spot free running engine. Even
with a drop or two I'll be happy, however, as I very much like not having to
machine off the scroll on the crank.
Regards,
Randy DeRuiter
> To: triumphs@autox.team.net
> Date: Sun, 19 Sep 2010 14:56:51 -0400
> From: n197tr4@cs.com
> CC: tr4racing@googlemail.com
> Subject: [TR] Rear scroll seal oil leak....recent subject.
>
> Christian Marx (Germany) designed a new seal in VITON material.
>
> I have the new VITON seals and the installation instructions.
>
> I sent Chris $1350 for 20 of them...That's $67.50 each.
>
> That's your cost at the moment in North America. No markup.
>
> I have the modified scroll seals on an exchange basis or you can modify
your
> own to a drawing.
>
> There's NO modification required for the crankshaft.
>
> Joe A.
>
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/triumphs/deruiterville@hotmail.com
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|