triumphs
[Top] [All Lists]

Re: [TR] GT6 Oil Filter Adapter

To: TRDOCTOR@aol.com, triumphs@Autox.Team.Net
Subject: Re: [TR] GT6 Oil Filter Adapter
From: tbe749@aol.com
Date: Mon, 23 Aug 2010 08:02:37 -0400
Sam

It is a tight fit for sure so if they supplied the wrong filter that could be
your problem. You definitely have to go in from the bottom underneath the
steering rod. You might have problems with the brass brake junction or bolt
attached to the frame. Just drained the oil and filter this weekend so I know
it will fit


Good luck
Tom


-----Original Message-----
From: TRDOCTOR@aol.com
To: triumphs@autox.team.net; rimmerbros.com@aol.com
Cc: tr6@atlasok.com
Sent: Fri, Aug 20, 2010 3:21 pm
Subject: [TR] GT6 Oil Filter Adapter


Worked this morning trying to fit the spin on oil filter adapter from
immer on my LHD GT6.  After removing the side cover under the  hood I was able
o extract the canister and fit the adapter.  Problem is  there is no way to
et the oil filter in there unless I remove the relief valve  and then
here is no guarantee that I will be able to get it back in. I am using  the
ilter supplied and can't find a shorter one.  Any suggestions?   If I have to
isassemble stuff every time I change the filter I'll just put the  canister
ack on and send this one back.

am Clark
reen Country Triumphs

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>