that is what I was hoping. Will tackle it tomorrow.
Thanks
----- Original Message -----
From: "Geo Hahn" <ahwahneetr@gmail.com>
To: <cfmtr3a@verizon.net>
Cc: <triumphs@autox.team.net>
Sent: Sunday, August 22, 2010 9:31 PM
Subject: Re: [TR] TR3 Engine Breather Pipe
> On 8/22/10, Carl TR <cfmtr3a@verizon.net> wrote:
>> ...forgot to pull out the plug that is in the hole. Is there any secret
>> to getting
>> it out? It is a pressed in...
>
> It is just pressed in and rather snug, and not an easy spot to get at.
>
> I managed to weaken the face of the plug with a dremel, then drive a
> stubby screwdriver thru the metal. Once that was in I was able to
> twist the cap and finally pry it out. They'll never use that cap
> again.
>
> Geo
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|