I had the same problem with the Herald engine that uses the same design of
pushrod tubes. I tried some green lock-tite which helped but what cured it was
reflaring the tubes. I used an old, small drill chuck that fit inside of the
flare and tapped repeatedly with a hammer.
I had removed the head so I did both sides but you could try doing it on one
side with the head still installed on the car with the pushrods removed.
Edward Hamer
Petaluma CA
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|