My TR3A finally clocked over the 500 mile mark since its rebuild, and I
re-torqued the head (each nut needed another half-flat or so). To reach the
center nuts I had to remove the rocker assembly. When I finished the
retorque job and went to refit the rockers, I saw that one of the pushrods
was standing proud of all the others by 1-1/2 inch. It acts as though it is
hung up on the top of the tappet; no amount of persuasion (gentle) or engine
rotation will cause it to return to its normal position. I lifted one of the
other pushrods to feel what a proper seat felt like, and now IT is standing
proud by 1-1/2 inch and will not retreat to its normal position. The rods,
when lifted out, show an inch or so of oil on them, so they appear to be in
the tappets. Could the tappets be hung up above the cam?
Rick Chandler
2414 73rd Avenue SE
Mercer Island WA 98040
Home 206 236 8662
Cell 206 909 8408
[demime 1.01d removed an attachment of type image/jpeg which had a name of
image001.jpg]
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|