> Trying to fit TR4 brake and clutch master cylinders to my TR2 project
> and have a couple of questions about the clutch mc hard pipe. Is this
> pipe a larger diameter (3/16" vs. 1/4") than the brake tubing or hard
> pipe?
I don't recall the crossover point, but the fitting on the MC did get one
size larger at some point.
> Also questioning the type and size of fitting on the clutch mc
> connecting the hard pipe. I assume it is a female fitting and wondering
> if they are available (without the whole pipe) anywhere?
I believe so, but be sure you get the 'British' style. The proper nuts have
a short unthreaded section at the tip, which can be seen at
http://tinyurl.com/3xm2nbd
(scroll down to the nuts)
That link appears to be one source, but I was able to find them at my local
auto parts store.
-- Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|