On Monday, August 02, 2010 08:47:33 pm Gary Nafziger wrote:
> I also have the wood pieces inside the doors (tr-3) riddled by old used
> screw holes. I planned on making new ones but didn't think i could make
> them myself since there were some curves in the wood that I didn't think I
> could get right.
>
> I've decided to use my old ones and have filled the holes with the best
> wood putty/filler I could find. My only concern is whether the wood
> filler will be strong enough to hold the brackets with side curtains for
> years. However, I'm thinking the side curtains might not be used much at
> all so this might not be an issue in the long run.
>
> just some thoughts
>
> gary n.
>
Gary,
I was saddled with the same problem with my 58 3. I took an idea from my dad
and drilled out the holes and filled them with maple dowels glued in with
permanent wood glue. Sanded them down and finished with some varnish to
prevent water penetration and warp. Make sure the dowels fit real tight.
Worked great.
Bob
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|