Hi Dave:
Now that is overkill!
I searched un "loading dock ramp" and came up with things starting at $2000".
Tha's getting closer to the level I had in mind.
Cheers,
Mark
________________________________________
From: triumphs-bounces@autox.team.net [triumphs-bounces@autox.team.net] On
Behalf Of Dave1massey@cs.com [Dave1massey@cs.com]
Sent: July 12, 2010 9:42 PM
To: triumphs@autox.team.net
Subject: Re: [TR] Ramping things up
In a message dated 7/12/2010 7:46:25 PM Central Daylight Time,
mhooper@digiscreen.ca writes:
> Additionally, the prospective sites all have the advantage of a garage
> door at
> the back of a large open area. So, I thought of the great advantage of
> being
> able to drive the LBC to work and parking it inside. Safe, tidy and even
> good
> for winter storage. Unfortunately all the doors are at loading dock
> height,
> not ground level. Is there a sort of standard steel ramp that one can buy
> and
> mis-label as "photocopying supplies" that would let me drive in?
>
Unfortunately most everything I find is way overkill for a TR6.
http://loadingdocksupply.com/steel_yard_ramps
And way more than you are likely to be able to hide as Photocopy supplies.
You could propably buy a forklift for less and use it to pick the car up
and set it on the dock.
Way more fun, too.
Dave
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|