Hi All:
I have a leak in the clutch master cylinder of my 1972 TR6. Tired of Dot5 all
over shoes and carpet, I bought a kit from our local parts supplier.
However, he was a bit uncertain as to which diameter unit was in the car.
There were apparently 0.7" and 0.75" diameter units in the TR6 run. I vaguely
recall this. I have just removed the unit and I see that it has Girling 70 in
raised letters on the casting. That would seem to settle the question of which
unit goes with my car.
Unfortunately I cannot remember which kit type the parts man sold me. The kit
is labelled "CSP 1967" and "QA 1197" in smaller letters. Do I have a 0.75 or
0.70 kit?
Mark Hooper
1972 TR6
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|