I took a quick look at the TR6 trying to fit a TR7/8 gas strut and the
short answer is it won't work without fabricating brackets and what not. To
work with the existing prop rod a cylinder that colapses to about 10 1/2 inches
(267 mm). If it extends to about 18 inches (450 mm) we will have a roughly
equivalent opening.
Step 2: searching for the appropriate cylinder.
Dave
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|