Is it me or does the TR6 clutch master cylinder look exactly like a TR4 clutch
master. The part numbers are different from the big three, but when I put
them next to each other (I have a 6 and 4) they look identical. My TR4 is
early and has a .75 bore master and my 6 master is a .7. That and the fact
that the push rod bracket is a little wider. Seems like a could use my spare
TR6 master and the push rod from the 4 master.
Secondly, I will be changing out the brake and clutch hydraulics and will
switch to DOT5 silicon. Any recommendations on the best substance to use to
clean out the lines?
Tearing down a new TR4 is fun! Thanks in advance.
Jim Henningsen
Maitland, FL
62 TR4 CT5212LO
75 TR6
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|