> I heard during a TR gathering, that there are teflon washers
> available
> in lieu of the old cork or neoprene cup washers that seal the
> jet.
Hmm, interesting thought. I've been happy with the nitrile rubber ones that
Moss sells, but PTFE (aka Teflon) might let the choke work a bit easier.
The Moss seals are standard O-rings (sorry, don't have the size offhand), so
it should be easy enough to source PTFE O-rings from a supplier like MMC.
http://www.mcmaster.com/#o-rings/=7irabv
However, PTFE is much harder than the nitrile rubber, so I'm not convinced
they would seal as well. Viton or fluorosilicone might be a better choice.
Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|